Rudder can steer on ground , , , - 4 CH Full RC - Aileron, Elevator, Rudder, Throttle
, - Powerful brushless motor
, - Excellent stability
, - Ready to Fly in Just Minutes!
, - Super tough
, - Lightweight
, - Shock Resistant Fuselage
, - Strong Wings
, - Pre-installed Electronics
, - Suitable for beginners and experts
, - Only required 8 AA batteries for the transmitter to start flying
, ,
This 2.4G brushless motored flying boat is an amazing looking ...
NitroTek
| Height | 195mm | | Length | 570mm | | Width | 440mm | | Wheel base | 355mm | | Track F/R | 370mm | | Ground clearance | 40mm | | Gear ratio | 13.1 | | Weight | 3950g | | Transmitter | 2 channel |
, , , - New C-hub steering;
, - Newly developed suspension;
, - Twin adjustable rear suspension;
, - Lightweight ultra-compact gear box;
, - Solid aluminum chassis;
, - Quicker steering and fast response;
, - 16mm super big bore oil shocks;
, - New gear ratio;
, - Easy maintenance pinion gearbox;
, - All Steel Gear;
, - Adjustable Sway bar ball cups (Pro only);
, - High-downforce wing;
, ,
The stunning ACME Mighty is a fully built, fully featured, ...
NitroTek
| Width | 330MM | | Height | 165MM | | Track | 267MM | | Length | 390MM | | Wheel base | 280MM | | Gear ratio | 10.44 | | Engine | Team Infinity 18 | | Wheel dia. | 108*56MM | | Ground clearance (F/R) | 38MM/46MM |
, , , - 1/10 Scale nitro powered car
, - 4WD Shaft drive system
, - Infinity 18 size pull start engine
, - Oil-filled Alluminium shocks
, - Single speed gear box
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted and cut body shell
, - Sealed box for protecting receiver system
, - High quality 27MHZ CE approved Radio system with changeable crystals.
, ,
Unstoppable power allows this off road truck to go where ...
NitroTek
| Width | 267MM | | Height | 155MM | | Track | 240MM | | Length | 430MM | | Wheelbase | 280MM | | Gear ratio | 5.69 | | Engine | Team Infinity 18 | | Wheel dia. | 88*34MM(FRONT); 88*41MM(REAR) | | Ground clearance | 27MM |
, , , - 1/10 Scale nitro powered car
, - 4WD Shaft drive system
, - Fully ball raced system
, - Infinity 18 size pull start engine
, - Aluminium oil-filled shocks
, - Two speed automatic gear box
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted and cut body shell
, - Sealed box for protecting receiver system
, - Anti-roll bars pre-fitted
, - High quality 27MHZ CE approved Radio system with changeable crystals.
, , ,
If you want to race off road and on road ...
NitroTek
standard Conquistador and ..." />
| Width | 330MM | | Height | 165MM | | Track | 267MM | | Length | 390MM | | Wheel base | 280MM | | Gear ratio | 10.44 | | Engine | Team Infinity 18 | | Wheel dia. | 108*56MM | | Ground clearance (F/R) | 38MM/46MM |
, , , - Fully Upgraded Special Edition!
, - 1/10 Scale nitro powered car
, - 4WD Shaft drive system
, - Infinity 18 size pull start engine
, - Oil-filled Alluminium shocks
, - Single speed gear box
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted and cut body shell
, - Sealed box for protecting receiver system
, - High quality 27MHZ CE approved Radio system with changeable crystals.
, ,
We have taken a standard Conquistador and ...
NitroTek
standard Condor Pro ..." />
| Width | 267MM | | Height | 155MM | | Track | 240MM | | Length | 430MM | | Wheelbase | 280MM | | Gear ratio | 5.69 | | Engine | Team Infinity 18 | | Wheel dia. | 88*34MM(FRONT); 88*41MM(REAR) | | Ground clearance | 27MM |
, , , - Fully Upgraded Special Edition!
, - 1/10 Scale nitro powered car
, - 4WD Shaft drive system
, - Fully ball raced system
, - Infinity 18 size pull start engine
, - Aluminium oil-filled shocks
, - Two speed automatic gear box
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted and cut body shell
, - Sealed box for protecting receiver system
, - Anti-roll bars pre-fitted
, - High quality 27MHZ CE approved Radio system with changeable crystals.
, ,
We have taken a standard Condor Pro ...
NitroTek
| Length | 400mm | | Height | 160mm | | Width | 250mm | | Wheelbase | 275mm | | Gear Ratio 2 Speed | 5.84 | | Ground Clearance | 26mm | | Front Tyres | 32mm width 86mm diameter | | Rear Tyres | 40mm width 86mm diameter | | Radio | Wheel type 2.4G | | Engine | Infinity .18 |
, , , - Pivot Ball suspension
, - Assembled Oil-filled aluminium shocks
, - 2.5mm thick anodised aluminium chassis
, - Composite Tuned Pipe
, - Pre-painted body with decals applied
, - Super-efficient 4WD shaft-drive
, - 75 cc fuel tank with splash guard
, - 2 speed automatic gearbox
, - Hollow light weight flywheel
, - Slipper clutch system to protect spur gear
, - High impact & high traction electroplated wheels
, - Fiber disc brake for extra stopping power
, - Front and rear hardened metal drive gears
, - Sealed radio box protects the electronics
, - Adjustable steel turnbuckles
, - High performance Infinity 18 Engine
, - Wheel controller
, ,
This is the great looking and performing nitro buggy. The ...
NitroTek
| Length | 400mm | | Height | 160mm | | Width | 250mm | | Wheelbase | 275mm | | Gear Ratio 2 Speed | 5.84 | | Ground Clearance | 26mm | | Front Tyres | 32mm width 86mm diameter | | Rear Tyres | 40mm width 86mm diameter | | Radio | Wheel type 2.4G | | Engine | Infinity .18 |
, , All the top features of the standard Backwash nitro radio controlled car as listed below, plus loads of hop ups pre-installed as listed above!
, , - Pivot Ball suspension
, - Assembled Oil-filled aluminium shocks
, - 2.5mm thick anodised aluminium chassis
, - Composite Tuned Pipe
, - Pre-painted body with decals applied
, - Super-efficient 4WD shaft-drive
, - 75 cc fuel tank with splash guard
, - 2 speed automatic gearbox
, - Hollow light weight flywheel
, - Slipper clutch system to protect spur gear
, - High impact & high traction electroplated wheels
, - Fiber disc brake for extra stopping power
, - Front and rear hardened metal drive gears
, - Sealed radio box protects the electronics
, - Adjustable steel turnbuckles
, - High performance Infinity 18 Engine
, - Wheel controller
, , ,
The Backwash Pro is the ultimate nitro rc car, if ...
NitroTek
| Length | 400mm | | Height | 185mm | | Width | 310mm | | Wheelbase | 275mm | | Gear Ratio 1 Speed | 13.34 | | Ground Clearance | 30mm | | Tyres | 60mm width 120mm diameter | | Radio | Wheel type | | Engine | Infinity .18 |
, , , - Pivot Ball suspension
, - Innovative spring loaded bumper
, - 8 Oil-filled aluminium shocks
, - 2.5mm thick anodised aluminium chassis
, - Composite Tuned Pipe
, - Pre-painted body with decals applied
, - Super-efficient 4WD shaft-drive
, - 75cc fuel tank with splash guard
, - Hollow light weight flywheel
, - Slipper clutch system to protect spur gear
, - High impact & high traction electroplated wheels
, - Fiber disc brake for extra stopping power
, - Front and rear hardened metal drive gears
, - Sealed radio box protects the electronics
, - Adjustable steel turnbuckles
, - High performance Infinity 18 Engine
, - Wheel controller
, ,
This HSP nitro monster truck has been finished with a ...
NitroTek
| Length | 400mm | | Height | 185mm | | Width | 310mm | | Wheelbase | 275mm | | Gear Ratio 1 Speed | 13.34 | | Ground Clearance | 30mm | | Tyres | 60mm width 120mm diameter | | Radio | Wheel type | | Engine | Infinity .18 |
, , All the top features of the standard Bug Crusher as listed below plus loads of hop ups pre-installed as listed above! , , - Pivot Ball suspension
, - Innovative spring loaded bumper
, - 8 Oil-filled aluminium shocks
, - 2.5mm thick anodised aluminium chassis
, - Composite Tuned Pipe
, - Pre-painted body with decals applied
, - Super-efficient 4WD shaft-drive
, - 75cc fuel tank with splash guard
, - Hollow light weight flywheel
, - Slipper clutch system to protect spur gear
, - High impact & high traction electroplated wheels
, - Fiber disc brake for extra stopping power
, - Front and rear hardened metal drive gears
, - Sealed radio box protects the electronics
, - Adjustable steel turnbuckles
, - High performance Infinity 18 Engine
, - Wheel controller
, ,
This HSP nitro monster truck has been finished with a ...
NitroTek
| Height | 185mm | | Length | 505mm | | Width | 310mm | | Wheel base | 315~320mm | | Track F/R | 310mm | | Ground clearance | 30mm | | Weight | 3300g | | Transmitter | 2 channel |
, , , - 1/8 Scale Gas Powered Car
, - Fully Assembled
, - 4wd Shaft Drive System
, - W/.18 Easy-To-Start Pull Start Powerful Engine
, - Oil-Filled Aluminium Shocks
, - Single Speed
, - Front And Rear Bevel Differentials
, - W/125cc Fuel Tank
, - Quicker Steering And Fast Response
, - Low Centre Of Gravity Design
, ,
The Attacker is our entry level to the world of ...
NitroTek
| Width | 208MM | | Height | 108MM | | Track | 208MM | | Length | 297MM | | Wheel base | 191MM | | Gear ratio | 11.2 | | Engine | Toki 06 Size | | Wheel dia. | 73x39.5MM | | Ground clearance (F/R) | 19MM | | Chassis | 2mm-thick hard anodized alum. | | Drive | Four wheel shaft drive | | Fuel Tank | 38cc | | Ball Bearings | Full set | | Shocks | Four oil filled shocks | | Shock towers | Anodized aluminum | | Clutch Bell | Steel | | Differentials | Bevel gear type | | Brakes | Metal disc brake | | Clutch shoes | 2 shoe race spec | | Exhaust | Alloy manifold and tuned plastic pipe | | Caster | Adjustable | | Camber | Adjustable | | Body | Pre-painted | | Build | Fully built |
, , , - 1/16 Scale mini nitro powered truggy
, - High quality Toki engine
, - Thick aluminium shock mounts
, - Solid steel drive cups
, - 2 piece racing clutch
, - Disc brake system gives ultimate stopping power
, - Sealed radio box protects electronics
, - 27MHZ CE approved Radio system with changeable frequency crystals
, - C-hub front and rear suspension
, - Front & rear differentials
, - Fully ball raced
, - Metal manifold
, - High torque mini servos
, - Fully assembled
, - Alum. upgrades available
, - Front and rear anti roll bars fitted as standard
, ,
The NB16-T is a mini nitro radio controlled car with ...
NitroTek
| Width | 199MM | | Height | 115MM | | Track | 185MM | | Length | 380MM | | Wheelbase | 259MM | | Gear ratio | 8.35 | | Engine | New Powerful Team Infinity 18 | | Wheel dia. | 64*26MM | | Ground clearance | 8.5MM |
, , , - 1/10 Scale nitro powered car
, - 4WD Shaft drive system
, - Japanese high quality pull start engine
, - Oil-filled shocks
, - Powerful .18 engine
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted exclusive body shell
, - Sealed box for protecting receiver system
, - High quality 27MHZ CE approved Radio system with changeable crystals.
, ,
By popular demand we are now stocking a range of ...
NitroTek
| Width | 267MM | | Height | 155MM | | Track | 240MM | | Length | 430MM | | Wheelbase | 280MM | | Gear ratio | 8.35 | | Engine | Team Infinity .18 | | Wheel dia. | 88*34MM(FRONT); 88*41MM(REAR) | | Ground clearance | 27MM |
, , , - 1/10 Scale nitro radio controlled buggy
, - 4WD Shaft drive system
, - Infinity powerful .18 pull start engine
, - Oil-filled shocks
, - Front and rear bevel differentials
, - 75CC Fuel tank
, - Metal disc brake system
, - Pre-painted body shell
, - Sealed box for protecting receiver system
, - High quality 27MHZ CE approved Radio system with changeable crystals.
, ,
By popular demand we are now stocking a range of ...
NitroTek
| Scale | 1/5 | | D/W | Rear 2WD system, differential with built-in gears | | Brakes | Rear Disc | | Speed | 80km/h | | Engine | Single cylinder, two stroke, air-cooled, 23cc | | Torque | 1.8N.m | | Power | 1.58kw / 2.15 bhp | | Fuel | Petrol / engine oil (25 | | Fuel tank capacity | 40 minutes | | Start method | pull start | | LxWxH | 817x480x280mm | | Tyres | 170mm x 60mm | | Wheelbase (F/R) | 570mm |
, - 2.4GHz LCD transmitter
, , , , - Fully assembled Baja Buggy
, - Powerful pull start 23cc engine
, - Heavy duty parts (many metal)
, - Differential with built-in gear
, - Fully adjustable oil-filled shocks
, - Disc brake system
, - CE/ROHS approved controller
, - Strong 15kg/cm OEM Futaba servo
, - Sealed electronics box for use on wet days
, - Aluminium chassis
, - Waibro Carburetor
, - NGK spark plug
, - 80 km/h top speed
, - 2.4GHz radio equipment
, - Beautiful carbon style shell
, ,
This ShengQi Buggy is a beast with a massive feature ...
BevRC
DPCAV
Hobby-Lobby
HobbyKing
LowPriceRC
ngHobbies
NitroTek
R2Hobbies
RangeVideo
RCTimer
ReadyMadeRC
HobbyWireless
RCPlanet
HorizonHobby
HiModel
OFM
GetFPV
AMainHobbies
SDSHobby
GoodLuckBuy
Flying-Hobby
|